BUSKRO BK7IB-2, Руководство пользователя

Страница: 91 / 97

Appendix E AC Motor Drive Settings Page C-7
Buskro Ltd. BK7IB-2
C.3.3 Group 2: Operating Mode Parameters
Table C-3:
Parameters Functions Settings
Buskro
Setting
2-00
Source of frequency
command
0: Digital keypad
1: 0 ~ 10V from AVI
2: 4 ~ 20mA from AVI
3: Controlled by V.R on drive
4: RS-485 communication interface
1
2-01
Source of operation
command
0: By digital keypad
1: By external terminals, keypad STOP
enable
2: By external terminals, keypad STOP
disable
3: By RS-485 communication interface,
keypad STOP enable
4: By RS-485 communication interface,
keypad STOP disable
2
2-02 Stop method
0: Ramp stop
1: Coast stop
0
2-03 Carrier freq. 3 - 10K Hz 10
2-04 Reverse operation inhibit
0: Enable reverse
1: Disable reverse
2: Disable forward
0
2-05
ACI (4 - 20mA) input loss
detection
0: Decel to 0Hz
1: Stop immediately, display
EF
2: Run with the last freq.
0
2-06 Line Start Lockout
0: Enable
1: Disable
0