FOR YOU AND YOUR CHILD’S SAFETY PLEASE READ
THE FOLLOWING INSTRUCTIONS CAREFULLY.
Congratulations on purchasing your new
bushbaby nestegg
the most
innovative child cot available.
nestegg
has been designed to be light
to transport, easy to put up and give maximum child comfort.
Please be very careful when opening your nestegg. The cot is made
using ‘sprung steel hoops’ which are under tension when packed and
can open out with force.
Do not use
nestegg
on a surface above floor level.
Never leave your child unattended at any time when
using
bushbaby nestegg
if side entrance is open.
WARNINGS
For the comfort of your child please ensure the surface
on which you wish to place your
nestegg
is free from
uneven and sharp objects.
The
nestegg
is only ready for your child, once the mattress
has been inserted below the sleep sheet in the base.
This product is made from flame retardant fabric but
should be kept away from fire and other heat sources.
The product may burn if left in contact with a direct
flame source.
PLEASE SEE OTHER SIDE FOR INSTRUCTIONS ON HOW TO PACK YOUR NESTEGG AWAY
Bushbaby® PO Box 61, Stockport, Cheshire, SK3 0AP
Tel. +44 (0) 161 474 7097 Fax. +44 (0) 161 476 2647 [email protected] www.bush-baby.com
Additional or replacement parts should only be obtained directly from Bushbaby or via a recommended retailer.
For more information please call : +44 (0) 161 474 7097
To inflate:
Open the air valve and allow to inflate. Zip into base of nestegg through
the sleep sheet found around the inside of the
nestegg
. Once fully inflated
tighten the valve, extra air can be added if necessary.
To deflate the mattress:
Undo the air valve and roll the mattress from the opposite end, this may
be easier done on the floor by kneeling on it and squeezing the air out as
you go. When all the air is squeezed out tighten the air valve to stop it
re-inflating. Fold the mattress into four and place in the zip bag provided.
MATTRESS INSTRUCTIONS
nest
egg
®
