Bush AG66TB, Руководство по эксплуатации

Страница: 15 / 21

Cleaning and Maintenance
Cleaning and Maintenance
14
Cleaning
Be sure that all control switches are off and your
appliance cooled before cleaning your oven. Turn
off the appliance. Check whether the cleaning
products are recommended by the manufacturer
before using the cleaning materials on your oven.
As they may damage the surfaces.
Do not use
caustic creams, abrasive cleaning powders, thick
wire wool or hard tools. Enamelled parts of the
oven can be damaged if excess cleaning liquids
are not immediately removed.
Removal of the glass hob lid for cleaning
1-Move the glass hob lid to upright position.
(Figure 8)
2-Pull and move the lid with respect to direction 1.
(Figure 9)
3-Move the lid with respect to direction 2.
(Figure 10)
Cleaning of Inside of Your Oven
Take the plug of the oven out before starting
cleaning. The inside of enameled oven is best
cleaned best when the oven is warm. Wipe the
oven with a soft cloth that had been soaked in
soapy water after each use. Later wipe it with a
wet cloth once more and then dry. It may be
required to use a liquid cleaning material from time
to time and for a complete cleaning.
Do not clean
with dry/powder cleaners or steam cleaners.
Cleaning of Gas Cooker - Hob Part
Lift up the saucepan supports, caps and crowns of
hob burners.
Wipe and clean the back panel with a soapy cloth.
Wash the caps and crowns of hob burners and
rinse them.
Do not leave them wet, immediately
dry them with paper cloth.
After cleaning, make sure that you re-assemble the
parts correctly.
Do not clean any part of the hob with metal
sponge. It cause the surface to be scratched.
The pan support top surfaces may be scratched in
time due to usage.
During cleaning of the hob plate, make sure that no
water flows inside the burner cups, as this may
block the injectors.
Customer Helpline
0345 257 7271
Figure 8 Figure 9
Figure 10
1
2