Bush Hog BS1 Series, Руководство оператора

Страница: 30 / 38

OPERATION
BS1-BS2 09/20 Operation Section 4-5
© 2020 Alamo Group Inc.
O
PE
R
AT
IO
N
3.2 John Deere 300-500 Hitch Style
1. Lower John Deere hitch plate down as far as
possible and tilt forward.
2. Lock the upper attachment bar into the upper
hooks.
3. Lift the loader up and tilt back until the lower
attachment pins can be secure to the loader
with lynch pins.
3.3 Hook-Up - Skid Steer Style Hitch
Make sure Skid Steer hitch plate is properly attached to the Bale Spear. It must be secured
under the top angle bar and locking handles must be locked down with locking pins
extending fully through the bottom slots. An improperly attached Bale Spear can fall.
1. If needed, pull locking handles up on the Skid
Steer hitch plate until locking pins are raised up
and ready for hook-up.
2. Carefully drive up to the Bale Spear making
sure the hitch plate on the Skid Steer arms is
parallel with the Bale Spear hitch plate.
3. Rotate top of Skid Steer tilt arms slightly
forward.
4. Place top of Skid Steer hitch up until top angle
bar and Bale Spear hitch plate have come
together.
5. Slowly lift Skid Steer hitch up until top angle bar
and Bale Spear hitch plate have come together.
6. Rotate top of Skid Steer hitch plate back to align
bottom slots in the Bale Spear with locking pins
in the Skid Steer hitch plate.
7. Push lock handles on Skid Steer hitch down so
that the pins go through the bottom slots of the
Bale Spear hitch plate and handles lock down