BUSCH RA 0010 C, Инструкция по эксплуатации

Страница: 12 / 24

6 | Commissioning
12 / 24 Instruction Manual R5 RA_RC 0010-0016 C_EN_en
6 Commissioning
NOTICE
The machine can be shipped without oil.
Operation without oil will ruin the machine in short time!
• Prior to commissioning, the machine must be filled with oil, see
Filling Oil [ ► 9]
.
CAUTION
During operation the surface of the machine may reach temperatures of more than 70°C.
Risk of burns!
• Avoid contact with the machine during and directly after operation.
CAUTION
Noise of running machine.
Risk of damage to hearing!
If persons are present in the vicinity of a non noise insulated machine over extended pe-
riods:
• Make sure that ear protection is being used.
• Make sure that the installation conditions (see
Installation Conditions [ ► 8]
) are met.
• Switch on the machine.
• Make sure that the maximum permissible number of starts does not exceed 12 starts
per hour. Those starts should be spread within the hour.
• Make sure that the operating conditions comply with the Technical Data [ ► 20] .
• After a few minutes of operation, check the oil level and top up if necessary.
As soon as the machine is operated under normal operating conditions:
• Measure the motor current and record it as reference for future maintenance and
troubleshooting work.
6.1 Version with Oil Return Valve
During operation oil accumulates at the bottom of the upper chamber of the oil separa-
tor, which cannot flow down into the bottom chamber, as long as the machine runs.
After 2 hours of continuous operation, in case of high pressure difference between suc-
tion side and pressure side after a shorter period:
• Shut down the machine for at least 15 minutes.
ð
The oil can run down from the upper chamber of the oil separator into the bottom
chamber