manualshive.com logo in svg

BUSCH RA 0010 C, Инструкция по эксплуатации

Поделиться
Скачать
BUSCH RA 0010 C Скачать руководство пользователя страница 11

Installation | 5

Instruction Manual R5 RA_RC 0010-0016 C_EN_en

11 / 24

5.4 Electrical Connection

DANGER

Live wires.

Risk of electrical shock.

• Electrical installation work must only be executed by qualified personnel.

• Make sure that the power supply for the motor is compatible with the data on the

nameplate of the motor.

• The electrical installation must comply with applicable national and international standards.

• Provide a lockable disconnect switch on the power line so that the machine is com-

pletely secured during maintenance tasks.

• Provide an overload protection according to EN 60204-1 for the motor.

• Busch recommends installing a D-curve circuit breaker.

• Make sure that the motor of the machine will not be affected by electric or electro-

magnetic disturbance from the mains; if necessary seek advice from Busch.

• Connect the protective earth conductor.

• Electrically connect the motor.

5.4.1 Wiring Diagram Three-Phase Motor

NOTICE

Incorrect direction of rotation.

Risk of damage to the machine!

• Operation in the wrong direction of rotation can destroy the machine in a short time!

Prior to start-up, ensure that the machine is operated in the right direction.

• Determine the intended direction of rotation with the arrow (stuck on or cast).

• Jog the motor briefly.

If the rotation of the motor must be changed:

• Switch any two of the motor phase wires.

Delta connection (low voltage):

Star connection (high voltage):

Double star connection, multi-voltage
motor with 9 pins (low voltage):

Star connection, multi-voltage motor
with 9 pins (high voltage):

Содержание RA 0010 C

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды