UK Declaration of Conformity | 16
Instruction Manual R5 RD 0200-0360 A_EN_en
39 | 40
16
UK Declaration of Conformity
This Declaration of Conformity and the UKCA-markings affixed to the nameplate are valid for the machine within the Busch scope of delivery. This
Declaration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery (this can be the operating
company, too) must conduct the conformity assessment process for the superordinate machine or plant, issue the Declaration of Conformity for it and
affix the UKCA-marking.
The manufacturer is determined by the serial number:
Serial number starts with
DEM1…
Serial number starts with
CHM1…
Serial number starts with
USM1…
Busch Produktions GmbH
Schauinslandstr. 1
79689 Maulburg
Germany
Ateliers Busch S.A.
Zone industrielle
2906 Chevenez
Switzerland
Busch Manufacturing LLC
516 Viking Drive
Virginia Beach, VA 23452
USA
declares that the machine: R5 RD 0200 A; R5 RD 0240 A; R5 RD 0300 A; R5 RD 0360 A
fulfill(s) all the relevant provisions from UK legislations:
– Supply of Machinery (Safety) Regulations 2008
– Electromagnetic Compatibility Regulations 2016
– Restriction of the use of certain hazardous substances in Electrical and Electronic Equipment Regulations 2021
and comply(-ies) with the following designated standards that have been used to fulfill those provisions:
Standards
Title of the Standard
EN ISO 12100 : 2010
Safety of machinery - Basic concepts, general principles of design
EN ISO 13857 : 2019
Safety of machinery - Safety distances to prevent hazard zones being reached by the upper and lower
limbs
EN 1012-2 : 1996 + A1 : 2009
Vacuum pumps - Safety requirements - Part 2
EN ISO 2151 : 2008
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
EN 60204-1 : 2018
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN IEC 61000-6-2 : 2019
Electromagnetic compatibility (EMC) - Generic standards. Immunity for industrial environments
EN IEC 61000-6-4 : 2019
Electromagnetic compatibility (EMC) - Generic standards. Emission standard for industrial
environments
Legal person authorized to compile the technical file
and importer in the UK
(if the manufacturer is not located in the UK):
Busch (UK) Ltd
30 Hortonwood
Telford - UK
Maulburg, 2.01.2021
Chevenez, 2.01.2021
Virginia Beach, 2.01.2021
Dr. Martin Gutmann
General Manager
Busch Produktions GmbH
Christian Hoffmann
General Manager
Ateliers Busch S.A.
David Gulick
General Manager
Busch Manufacturing LLC
