16 | UK Declaration of Conformity
28 | 32
Instruction Manual R5 RB_RC 0021 C_EN_en
16
UK Declaration of Conformity
This Declaration of Conformity and the UKCA-markings affixed to the nameplate are valid for the machine within the Busch scope of delivery. This Dec-
laration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery (this can be the operating compa-
ny, too) must conduct the conformity assessment process for the superordinate machine or plant, issue the Declaration of Conformity for it and affix
the UKCA-marking.
The manufacturer is determined by the serial number:
Serial number starts with
CZM1…
Serial number starts with
USM1…
Busch Výroba CZ s.r.o.
Svárovská 620
460 01 Liberec 11
Czech Republic
Busch Manufacturing LLC
516 Viking Drive
Virginia Beach, VA 23452
USA
declares that the machine: R5 RB 0021 C; R5 RC 0021 C
fulfill(s) all the relevant provisions from UK legislations:
– Supply of Machinery (Safety) Regulations 2008
– Electromagnetic Compatibility Regulations 2016
– Restriction of the use of certain hazardous substances in Electrical and Electronic Equipment Regulations 2021
and comply(-ies) with the following designated standards that have been used to fulfill those provisions:
Standards
Title of the Standard
EN ISO 12100 : 2010
Safety of machinery - Basic concepts, general principles of design
EN ISO 13857 : 2019
Safety of machinery - Safety distances to prevent hazard zones being reached by the upper and lower
limbs
EN 1012-2 : 1996 + A1 : 2009
Vacuum pumps - Safety requirements - Part 2
EN ISO 2151 : 2008
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
EN 60204-1 : 2018
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN IEC 61000-6-2 : 2019
Electromagnetic compatibility (EMC) - Generic standards. Immunity for industrial environments
EN IEC 61000-6-4 : 2019
Electromagnetic compatibility (EMC) - Generic standards. Emission standard for industrial environ-
ments
Legal person authorized to compile the technical file
and importer in the UK
(if the manufacturer is not located in the UK):
Busch (UK) Ltd
30 Hortonwood
Telford - UK
Liberec, 11.11.2020
Virginia Beach, 11.11.2020
Michael Dostálek
General Manager
Busch Výroba s.r.o.
David Gulick
General Manager
Busch Manufacturing LLC
