14 | EU Declaration of Conformity
36 / 40
0870201062_RA1000-1600B_Ex_-0007_IM_en
14 EU Declaration of Conformity
This Declaration of Conformity and the CE-mark affixed to the nameplate are valid for the machine within the
Busch scope of delivery. This Declaration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery
(this can be the operating company, too) must conduct the conformity assessment process for the superordinate
machine or plant, issue the Declaration of Conformity for it and affix the CE-mark.
The manufacturer
Ateliers Busch S.A.
Zone Industrielle
CH-2906 Chevenez
declares that the machine(s)
R5
‘
ATEX
’
RA/RC 1000 B; RA/RC 1600 B
with the serial number:
has (have) been manufactured in accordance with the European Directives:
– ‘Machinery’ 2006/42/EC
– ‘ATEX Directive’ 2014/34/EU, for use in potentially explosive areas according to classification written on the
machine nameplate
– ‘Electromagnetic Compatibility’ 2014/30/EU
– ‘RoHS’ 2011/65/EU + Commission delegated directive (EU) 2015/863, restriction of the use of certain hazard-
ous substances in electrical and electronic equipment
and following the standards.
Standard
Title of the Standard
EN ISO 12100 : 2010
Safety of machinery - Basic concepts, general principles of design
ISO 13857 : 2019
Safety of machinery - Safety distances to prevent hazard zones being reached by the
upper and lower limbs
EN 1012-1 : 2010
EN 1012-2 : 1996 + A1 : 2009
Compressors and vacuum pumps - Safety requirements - Part 1 and Part 2
EN ISO 2151 : 2008
Acoustics - Noise test code for compressors and vacuum pumps - Engineering
method (grade 2)
IEC 60204-1 : 2016
Safety of machinery - Electrical equipment of machines - Part 1: General require-
ments
IEC 61000-6-2 : 2016
Electromagnetic compatibility (EMC) - Generic standards. Immunity for industrial en-
vironments
IEC 61000-6-4 : 2018
Electromagnetic compatibility (EMC) - Generic standards. Emission standard for in-
dustrial environments
EN ISO 13849-1 : 2015
(1)
Safety of machinery - Safety-related parts of control systems - Part 1: General prin-
ciples for design
EN ISO 80079-36 : 2016
Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmo-
spheres - Basic method and requirements
EN ISO 80079-37 : 2016
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmo-
spheres - Non electrical type of protection constructional safety ‘c’, control of igni-
tion source ‘b’, liquid immersion ‘k’
EN 1127-1 : 2011
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts
and methodology
Person authorised to compile the technical file:
Gerd Rohweder
Busch Dienste GmbH
Schauinslandstr. 1
DE-79689 Maulburg
Chevenez, 01.06.2020
Christian Hoffmann, General Director
(1)
In case control systems are integrated.
