BUSCH MINK MV 0040 D, Инструкция по эксплуатации

Страница: 5 / 32

Product Description | 2
0870221625_MV0040-0080D_-0000_IM_en_MD 5 / 32
2.1 Operating Principle
The machine works on the claw principle.
The MINK is fully air-cooled thanks to an integrated fan in the drive unit.
2.2 Application
The machine is intended for the suction of air and other dry, non-aggressive, non-toxic
and non-explosive gases.
Conveying of other media leads to an increased thermal and/or mechanical load on
the machine and is permissible only after a consultation with Busch.
The machine is intended for the placement in a non-potentially explosive environment.
The machine is capable of maintaining ultimate pressure, see Technical Data [ ► 29] .
The machine is suitable for continuous operation.
In order to avoid reverse rotation after switching off, the machine is equipped with a
non-return valve (NRV).
Note: The non-return valve (NRV) is no reliable means to prevent suction and shall
not be used as a non-return valve or shut-off valve for the system.
In case the machine shall be maintained after shutdown:
• Provide an additional manual or automatic operated non-return valve in the suction
line.
Permitted environmental conditions, see Technical Data [ ► 29] .
2.3 Optional Accessories
2.3.1 Inlet Filter
The inlet filter protects the machine against dust and other solids in the process gas.
The inlet filter is available with a paper or polyester cartridge.
2.3.2 Pressure Transmitter
A pressure transmitter is available to control the pressure on the suction side of the
machine.
2.3.3 PC-Software
For parameter settings with personal computers a PC-software and appropriate con-
nection cable can be provided.
2.3.4 Manual Control Unit
Control panel can be used for simply controlling the machine and parameter setting in
the field.