BUSCH MINK MM 1102 BV, Инструкция по эксплуатации

Страница: 15 / 56

MM 1104, 1144, 1102, 1142 B V ATEX-Version, Gas Tight
0870141675 /
190709
page 15
•
Reconnect the resistance thermometer Pt100 to the
temperature transmitter (white cable to pin 3, first red cable to
pin 5, second red cable to pin 6,
➔
sketch)
•
Firmly close the temperature measurement system (g) with the
lid
Overhaul
Busch service will only accept vacuum pumps that come with a
completely filled in and legally binding signed “Declaration of
Contamination” (form downloadable from www.buschvacuum.com).
Removal from Service
Temporary Removal from Service
•
Prior disconnecting pipes/lines make sure that all pipes/lines
are vented to atmospheric pressure
Recommissioning
•
Observe the chapter Installation and Commissioning
(
➔
page 6)
Dismantling and Disposal
•
Drain the oil
•
Make sure that materials and components to be treated as
special waste have been separated from the vacuum pump
•
Make sure that the vacuum pump is not contaminated with
harmful foreign material
According to the best knowledge at the time of printing of this
manual the materials used for the manufacture of the vacuum pump
involve no risk.
•
Dispose of the used oil in compliance with applicable
regulations
•
Dispose of the vacuum pump as scrap metal
WARNING
Improper work on the vacuum pump puts the operating
safety at risk.
Risk of explosion!
Approval for operation will be void!
Any dismantling of the vacuum pump that is beyond of
what is described in this manual must be done by specially
trained Busch service personnel only.
DANGER
In case the vacuum pump conveyed gas that was
contaminated with foreign materials which are dangerous
to health, harmful material can reside in pores, gaps and
internal spaces of the vacuum pump.
Danger to health during dismantling of the vacuum pump.
Danger to the environment.
During dismantling of the vacuum pump personal
protective equipment must be worn.
The vacuum pump must be decontaminated prior to
disposal.
DANGER
In case the vacuum pump conveyed gas that was
contaminated with foreign materials which are dangerous to
health, harmful material can reside in pores, gaps and
internal spaces of the vacuum pump.
Danger to health during dismantling of the vacuum pump.
Danger to the environment.
Prior to shipping the vacuum pump shall be decontaminated
as good as possible and the contamination status shall be
stated in a “Declaration of Contamination” (form
downloadable from www.buschvacuum.com).