Commissioning
Allocation of devices and definition of channels
Product manual 2CKA001473B9185
│
21
6.2
Allocation of devices and definition of channels
The devices connected to the system must be identified, i.e. they are allocated to a room
according to their function and are given a practical name.
The allocation is made via the allocation function of the Web-based
user interface of the System Access Point.
6.2.1
Add device
1. In the "Add devices" bar select the desired application and pull it via drag-and-drop into the
floor plan.
Fig. 11: Dragging the application from the add bar
A pop-up window opens which lists all the devices that are connected to the bus and suitable for
the selected application (e.g. all blind actuators, if the blind application has been selected).
