21
11. Establishing a
Bluetooth
connection
If you wish to establish a
Bluetooth
connection between your mobile and the HFCK for the first time,
you have to activate the
Bluetooth
function of your mobile phone and search for
Bluetooth
devices. In
this case, search for a device labelled „CC 9060...“. If several devices were identified, please select the
HFCK and enter the
PIN number 1234
. The
Bluetooth
®
connection (pairing) will then be established
between your mobile phone and the HFCK. It is possible that you will also have to click on ‘connect’ or
‘allow data transfer’ on your mobile phone if you want to be able to make a connection.
With a connection which has successfully been made, the name of the coupled mobile telephone and
of the provider will be shown and the data from the telephone book (SIM card) and the address book
(storage of the telephone) are transmitted to the HFCK. Depending on the amount of stored data, this
can take a few seconds. If the synchronisation of the phone book is interrupted, e.g. though an incom-
ing call, it is possible that all entries will not be transmitted. If this happens, the phone book should
once again be manually synchronised.
Note:
The telephone book on your mobile phone is generally synchronised by the hands-free
X
car kit at regular intervals. For the duration of this short moment, the voice control will
not be available to you and you will receive a corresponding message.
If it is not possible to establish a connection, please check and update the software release (firmware)
of your mobile phone or of the HFCK. You will find an overview dealing with this subject on the Internet
at www.bury.com.
Note:
In the internet you can find an overview with a large number of mobile telephones
X
which have been tested with this hands-free car kit. Please note, however, the use of
firmware which deviates from the list and is installed on a listed mobile telephone can
lead to the fact that certain displays and functions are no longer possible or only possible
to a limited extent.
