12
Installation of the hands-free car kit
4 - Voice output of the hands-free car kit
Version 1:
Refer to separate chapter: Installation of the audio switch box
AC 5120
Version 2:
Connect the external loudspeaker here if you do not want to or are not
able to make use of the vehicle’s own sound system. When installing
the loudspeaker, make sure it is positioned the correct distance from
the microphone.
Version 3:
With version 3, this connection remains unused. Please refer to the
description for connection 3.
5 - Microphone input
This is where you plug in the microphone jack. After connection 3 has
already been occupied use the rider. This ensures that neither of the
jacks is able to loosen as a result of vibrations.
6 - AUX-Out connection
Stereo music is output at connection 2. Here you can connect the AUX-
In input of your radio (if existent) via adapters available at local retail-
ers. For the connection to the hands-free car kit, the adapter must have
a 3.5 mm stereo jack. Depending on the car radio, the other end must
be selected otherwise. If your radio does not have an AUX-In, you can
use the car CD/MP3 adapter from the BURY accessories programme to
enable the reproduction of music via your radio.
7 - Monitor jack
Please plug the 9 pole plug of the monitor connection cable into this
jack. Tighten at least one of the two fixing screws hand-tight so that
this plug cannot become unplugged as a result of vibrations.
