Burster 9163 Скачать руководство пользователя страница 18

Страница: 18 / 162

Model 9163

Digital indicator

Page 18

2.2 Installation / panel-mounting

2.2.1 Installation dimensions

108

115

44,5

170

Figure 1: Installation dimensions of the 9163 digital indicator (dimensions in millimeter)

2.2.2 Installation instructions

Read the basic installation rules before you install the unit.

If you do not follow our safety instructions, there may be problems with electrical safety and
electromagnetic compatibility.

Furthermore, disregarding the safety instructions will forfeit the warranty.

Basic installation rules for the 9163

If you connect the unit to devices that are

not

electrically isolated (e.g. thermocouples):

Provide a dedicated conductor for the ground connection.

The ground connection must never be made directly via the machine rack.

If you install the unit in applications in which there is a risk of personal injury, damage to machinery or
property:

Combine the unit with additional limit monitoring equipment.

Check regularly during operation whether the alarm limit has actuated.

Содержание 9163



































































































































































Результаты поиска

Содержание 9163

Отзывы:

Burster 9163, Руководство пользователя, Страница: 18 / 162

Результаты поиска

Содержание 9163

Отзывы: