Burster 1427, Руководство по эксплуатации

Страница: 14 / 43

Page 14
5. Operation
5.1 Standard mode
After switching on the decade operates in the standard mode. The following information is shown at the
display:
The upper row shows the simulated temperature in “ ° C” or the generated resistance in “Ω” .
The lower row shows the type of the simulated temperature sensor (Pt100) and the setup temperature
scale IPTS68 or ITS90 according to the IEC751 standard or US according to the US/JIS standard.
The arrow symbol in the right corner informs that the cursor mode of the keys 2, 4, 6 and 8 is initialized.
The buttons ▲ and ▼ enable to step up or down the number on the active position.
The buttons ◄ and ► move the active position of the cursor to left or right.
Switching between cursor and numerical mode:

Push the ENT key.
Activating the SETUP mode:

Push the MENU key.
5.1.1 Use of cursor keys
The Cursor keys ▲ and ▼ enables to increase or decrease the number on the active position. The active
position is signed by the symbol “_” at the desired number.
With cursor keys ◄ and ► you’ll change the active position of the cursor.

Push the ENT key to switch the keys 2, 4, 6 and 8 between cursor and numerical mode.
The arrow in the lower right corner shows that the keys are in cursor mode.