manualshive.com logo in svg

burmeier Regia, Инструкция по эксплуатации

Поделиться
Скачать
burmeier Regia Скачать руководство пользователя страница 59

3.5.2.2

Removal

3.6

Safety sides

WARNING

Proceed in reverse order to the attachment process.

Risk of injury

Failure to heed this warning may result in physical injury due to falling from the bed.

•

Use only the safety sides described in this manual. Safety sides are either factory integra-
ted into the bed or available as accessories.

The bed is delivered as standard without any safety sides.

At the customer’s request, the bed can be equipped with safety sides to protect the resident
from falling out of bed. The safety sides can be raised from the lowered position beside the
mattress base to protect the resident.

Should it later be necessary to use a safety side, the bed can easily be fitted with this at a
later date.

There are two versions of safety side to choose from:

•

Split safety side (TSG)

•

Full-length safety sides (DSG)

Type of safety side

Type of mat-
tress base

Height of safety
side

Max. mattress
height

Full-length safety side

Metal

approx. 41 cm

approx. 19 cm

Comfort

approx. 37 cm

approx. 15 cm

Split safety side

Metal

approx. 41 cm

approx. 19 cm

Comfort

approx. 37 cm

approx. 15 cm

Assembling the Care Bed

Part B: Operator and Technical Personnel

23

Содержание Regia

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды