manualshive.com logo in svg

burmeier Regia, Инструкция по эксплуатации

Поделиться
Скачать
burmeier Regia Скачать руководство пользователя страница 139

3.11

Emergency release of the backrest

WARNING

Risk of injury

Failure to heed this safety information and instruction manual may cause the backrest to fall
unchecked, which could lead to serious injuries for both the member of staff and the resi-
dent.

•

The CPR release may only be carried out in the case of extreme emergencies and by
users who have a complete command of the procedure described below. We strongly ad-
vise you to practise CPR release of the backrest several times under normal conditions.
In the event of an emergency, you will then be able to react quickly and correctly.

•

If the backrest falls unchecked, the resident and/or the second member of staff could be
injured!

In the event of power supply outages or electrical drive system failures, the raised backrest
can be lowered by hand. 

Two carers are absolutely necessary to carry this out!

1.

Release the load on the backrest [1] before carrying out the CPR release procedure.

2.

To do so, the first person raises the backrest [1] slightly by gripping the outside frame
[2] of the head section and holds the backrest in this position.

3.

The second person now removes the locking pin [3]. To do so, swivel the curved clip [4]
away and draw the bolt and pin, together with the clip, out of the backrest motor lifting
pipe.

Operation

Part C: Care staff and residents

29

Содержание Regia

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды