Burley R6205A, Руководство пользователя, Страница: 17 / 19

U
ŽÍVATEĽSKÝ MANUÁL MIEŠAČOV - MODELY R6202A, R6202B
Page 17 of 19
On / Off switch
Switching on:
Press the switch (1)
Continuous running:
Press the locking knob on the switch (1) (2) to lock it in place
Switching off: Press the switch (1) briefly
Speed control: Use the speed control (3) to select the speed.
Switching between 1st - 2nd gear (4)
The switch position enables you to work at high or low speeds. The gear switch position
should only be changed when the unit is stopped, in order to prevent the gearing from being
damaged.
Ⅰ
1st gear
Ⅱ
2nd gear
Working With the Paint and Mortar
Mixer
The mains plug must be disconnected before the mixing tool is changed.
The unit should be run at low speed before it is immersed in or removed from the mixture.
The speed should only be increased to maximum after it has been fully immersed in the
mixture, in order to ensure that motor is kept as cool as possible. The machine must be
moved around inside the mixing vessel during the mixing process. Continue the mixing
process until all of the mixing components have been processed.
Always clean the mixer after you have finished using it.
8. CARE AND MAINTENANCE
Remove the plug from the socket before carrying out any adjustment,
servicing or maintenance.
Your power tool requires no additional lubrication or maintenance. Always store your
power tool in a dry place.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
If a fault can not be rectified, return the mixer to an authorized dealer for repair.
Cleaning
_ Keep the safety devices, ventilation slots and Motor housing as free of dirt and dust as
possible. Clean the unit by rubbing it with a clean cloth or blow it clean using low-pressure
compressed air.