Burley G4121, Инструкция по установке, обслуживанию и эксплуатации, Страница: 10 / 20

10
9.
Laying the Logs
Open the hinged door on the appliance. This is secured by a 10mm nut to gain access to the logs. On
no account should the appliance be operated whilst the door is open except for brief periods during
maintenance. Do not lay the log matrix in any way other than that shown. Check the log layout as they
may have been damaged during transit.
LOG LAYOUT (NATURAL GAS)
The rear matrix and front log should only need
removing for servicing. The rear matrix locates onto
the burner and the front log is pushed to the extreme
left hand side. Take care to locate them correctly to
ensure clean combustion. No additional logs should be
added to the fire.
Note the pilot position on the right hand side of the
burner.
LOG LAYOUT (LPG)
The rear matrix and front log are fitted similar
to the Natural Gas fire. The base log locates
onto the burner and the front log is pushed to
the extreme left hand side as shown. Take care
to locate them correctly to ensure clean
combustion. No additional logs should be
added to the fire.
Note the pilot position on the right hand side
of the burner.
*Note – The 2 top logs will be supplied glued
in position and should not be removed or repositioned. If they become detached then they can be
fitted as per the diagram but must on no account be discarded or fitted in any other way.
Front Log - IMPORTANT - the log must be this way up! Placed fully to the left NG & PR
Pilot side
•
Always secure the door closed after laying the fuel effects.
•
Do not attempt to use any unit with broken or damaged glass.
•
Do not use the fire with broken logs.
•
Do not add any additional fuel elements to the fire.
•
Do not use similar looking parts from other appliances, use only genuine spare parts.
•
Do not use the appliance for burning waste.