Burley 570-R Series, Руководство по эксплуатации и установке, Страница: 15 / 16

Remote Control
a. The fire can only be operated by remote control.
b. Be vigilant and keep the handset out of reach of children or other potential risks.
c. Due to the location of the infrared sensor, the remote control works best from a position predomi-
nantly in front of the appliance. It works up to a maximum distance of approximately 3 metres.
3 METRES MAXIMUM
120º
13.
THERMOSTAT OPERATION
The heater is automatically controlled by a thermostat to regulate the room temperature.
The easiest way to set the thermostat to your level of comfort is as follows:
a. Turn the heater on.
b. Leave the heater running until the room has reached your desired comfortable temperature.
c. Slowly turn the thermostat down until it clicks and the heater stops.
d. The heater will now cycle on and off to keep the room at the chosen temperature. Each time
the heat is turned on, it will return the room to this preset temperature and then start cycling off and
on. Should you wish to raise or lower the room temperature, i.e. during particularly cold spells,
simply turn the thermostat up or down accordingly.
Note: The thermostat switches the heater fully on or fully off as the room temperature fluctuates.
You do not get 30% of the heat when the dial is turned 30% of the way round and 70% when
it is turned 70% of the way round.
THERMOSTAT
Note: Thermostat cannot be adjusted with the
Orbital & Satin Stainless steel trims. The heater
can only be controlled with the remote control.