Bürkert 8791, Руководство по эксплуатации

Страница: 56 / 186

56
AS Interface
15. as inTerface
as interface connection 15.1.
AS interface (Actuator Sensor Interface) is a field bus system which is used primarily for networking binary sensors
and actuators (slaves) with a higher-level control (master).
Bus line
Unshielded two-wire line (AS interface line as AS interface cable harness) along which both information (data) and
energy (power supply for the actuators and sensors) are transmitted.
network topology
Freely selectable within wide limits, i.e. star, tree and line networks are possible. Further details
describe the AS interface specification (A/B slave model conforms to the version 3.0 specification).
Technical data for as interface pcBs 15.2.
Supply: Via AS interface
Outputs: 16 bit set-point value
Certification: Licence no. XXXXXX according to version 3.0
programming data 15.3.
I/O configuration 7 hex
ID code 3 hex (analog profile)
Extended ID code 1 F hex
Extended ID code 2 4 hex
Profile S-7.3.4
Programming Data Table 28:
Bit configuration
D1 ... D16: Value range of the analog set-point value from 0 to 10.000:
0 corresponds to 0 %
10.000 corresponds to 100 %
parameter bit p3 p2 p1 p0
Output not used not used not used not used
Bit configuration Table 29:
english
Type 8791