Bürkert 8791, Руководство по эксплуатации

Страница: 40 / 186

40
Attachment and assembly
17
16
12
6
19
18
14
12
22
5
4
13
15
Assembling the lever Fig. 14:
The gap between the driver pin and the axle should be the same as the drive stroke. As a result, the lever
has a range of 60° (see
Fig. 15: ).
angular range of the position measuring system:
The maximum angular range of the position measuring system is 180°.
rotational range of the lever:
To ensure that the position measuring system operates at a good resolution, the rotational range of the
lever must be at least 60°.
The rotational movement of the lever must be within the position measuring system angular range of 180°.
The scale printed on the lever is not relevant.
60°
Required
minimum angular range
of the lever
The swivel movement of the lever must be
within the position measuring system slewing
range of 180°.
180°
Maximum rotational
range of the lever
Rotational range of the lever Fig. 15:
Attach lever to the axle of the positioner and screw tight.
→
english
Type 8791