Burkert MS08, Руководство по эксплуатации, Страница: 65 / 84

Type MS08
General Settings - Diagnostics
65
13.11 Read the maximum number of transmit errors since
the last power-up of the device
Make sure that the login user level is at least Advanced user . Refer to chapter Available login user
levels [
}
35] .
Go to device SAC254 Sensor > function General settings > tab Diagnostics .
Select büS status .
Read the value of the parameter Transmit errors max. .
13.12 Reset the 2 maximum error counters
To reset the 2 maximum error counters, do the following procedure:
Make sure that the login user level is at least Advanced user . Refer to chapter Available login user
levels [
}
35] .
Go to device SAC254 Sensor > function General settings > tab Diagnostics .
Select büS status .
Select Reset error counter .
The Reset error counter wizard page appears.
To cancel the procedure, select Cancel .
To reset the error counters, select Finish .
The 2 maximum error counters are reset.
13.13 Read whether the measured process data is sent on
büS or on the CANopen fieldbus
To read out whether the measured process data (PDO, process data object) is sent on büS or on the CAN-
open fieldbus, do the following procedure:
Go to device SAC254 Sensor > function General settings > tab Diagnostics .
Select büS status and read the value of the parameter CANopen status .
▪ If the CANopen status is Operational , the PDOs are sent to büS or to the CANopen fieldbus.
▪ If the CANopen status is Pre-Op (pre-operational), the PDOs are not sent on büS or on the CANopen
fieldbus and the message büS is not operational is generated in the message list.
13.14 Read the generated events
Go to device SAC254 Sensor > function General settings > tab Diagnostics .
Select Logbook .
The events that are related to the product are displayed. Refer to fig. Overview of events in the log-
book [
}
66] .
The default list view shows message type, message text and the time of the message.