Burkert Flowave 8098, Руководство по эксплуатации

Страница: 288 / 354

288
Outputs – Parameter
Type 8098 FLOWave L
18 OUTPUTS – PARAMETER
The output parameters can be set with the
Installer
user level.
Even if the menu Outputs is available on an Ethernet device variant, we recommend to not use the
outputs.
18.1 Default settings
You can find the default settings of the device in the CANopen supplement for the Type 8098 FLOWave L at
country.burkert.com .
→
Before making any change in the settings, use the Bürkert Communicator software to print a pdf file with
all the default settings of the device.
18.2 Changing the type of output 3
NOTICE
Risk of short-circuit if the configuration of output 3 is wrong.
▶
Before wiring the output 3, make sure the output 3 is correctly configured.
By default, the output 3 is configured as an analogue output. It can be configured as a digital output.
To change the type of the output 3, do the following:
→
Go to the CONFIGURATION view.
→
Outputs
→
Confirm to access the Parameter view.
→
Output 3 type .
→
Choose the type of the output 3.
→
Save.
The configuration
and the name
of the output 3 are changed.
English