Burkert Flowave 8098, Руководство по эксплуатации

Страница: 158 / 354

158
SAW sensor – Parameter
Type 8098 FLOWave L
15.4.8 Resetting the default values of the error limits, the warning
limits and the hysteresis of the volume flow rate
The default values of the error limits, the warning limits and the hysteresis of the volume flow rate depend
on the DN of the measurement tube:
•
high error value: maximum volume flow rate value authorized for the DN,
• low error value: opposite value of the high error value,
• high warning value: 80 % of the maximum volume flow rate value authorized for the DN,
• low warning value: opposite value of the high warning value,
• value of the hysteresis: 0.0 l/min.
To reset the default values of the error limits, the warning limits and the hysteresis of the volume flow rate,
do the following:
→
Go to the CONFIGURATION view.
→
SAW sensor
→
Confirm to access the Parameter view.
→
Stand. meas. values
→
Volume flow
→
Limits
→
Reset to default
→
Confirm.
The limit values and the hysteresis value are reset.
→
Go back to the parent menu.
English