Burkert 8746, Руководство по эксплуатации

Страница: 8 / 60

8
Basic safety information
Type 8746 Profibus, 8746 Analogue
2.1 Product variant with ATEX
certification
DANGER
risk of explosion that is due to improper use of the product
in potentially explosive areas.
▶
Observe the specifications of the ATEX-conformity
certificate.
▶
Observe the specifications in the ATEX supplement for Type
8746. The supplement is available at country.burkert.com .
The ATEX certification is only valid if the product is used as
described in the ATEX supplement.
If unauthorized changes are made to the product, then the ATEX
certification becomes invalid.
3 BASic SAfETy iNfoRMATioN
This safety information does not take into account any contin -
gencies or occurrences that may arise during installation, use
and maintenance of the product.
The operating company is responsible for the respect of the local
safety regulations including for the personnel safety.
risk of injury that is due to pressure in the installation or in
the product.
▶
Before working on the installation or product, cut the pres -
sure. Vent and drain the pipes.
risk of injury from electric shocks.
▶
Before working on the installation or product, switch off the
power supply. Make sure that nobody can switch the power
supply on.
▶
Observe all applicable accident protection and all applicable
safety regulations for electrical equipment.
Burn hazard and fire hazard that are due to hot surface of the
product.
▶
Do not touch the hot surface with bare hands.
▶
Wear safety gloves to touch the product.
▶
Keep the product away from any highly flammable materials
or fluids.
Risk of injury that is due to escape of the fluid.
▶
Observe all applicable accident protection and all applicable
safety regulations relating to the operating fluid used.
English