manualshive.com logo in svg

Burkert 8653 AirLINE Field, Руководство по эксплуатации, Страница: 41 / 43

Поделиться
Скачать
Burkert 8653 AirLINE Field Скачать руководство пользователя страница 41

41

Removal

Type 8653

15 

remOval

Danger

risk of injury from high pressure and discharge of medium.

 

►

Before working on the device or system, secure the actuators against moving. 

 

►

Before working on the device or system, switch off the pressure. Vent or drain lines.

Warning

risk of injury from electric shock.

 

►

Before working on the device or system, switch off the power supply. Secure against reactivation.

 

►

Observe applicable accident prevention and safety regulations for electrical equipment. 

risk of injury due to improper removal!

 

►

Removal should be performed only by trained personnel using suitable tools.

 

→

Undo the pneumatic connection.

 

→

Undo the electrical connection.

For assembly using the bracket

 

→

Push back the lever for unlocking the device and at the same time pull the device upwards out of the 

bracket.

For assembly on standard rail

 

→

Push back the lever for unlocking the device and at the same time pull the device upwards out of the 

bracket.

 

→

Using a slotted-head screwdriver, carefully turn the fastening screws on the bracket all the way 

anticlockwise.

 

→

Tilt the bracket upward slightly and remove it from the standard rail.

english

Содержание 8653 AirLINE Field












































Отзывы:

Нет отзывов