Burkert 8653 AirLINE Field, Руководство по эксплуатации, Страница: 18 / 43

18
Assembly
Type 8653
7.2.1 Assembly on wall using the bracket
Caution
risk of injury due to sharp edges.
The earthing plate on the bracket has sharp edges that can cause cuts.
►
Wear suitable protective gloves.
preparatory work
The bracket is connected to the device in the scope of delivery. For assembly on wall using the bracket, the
device must be released from the bracket.
→
Push back the lever for unlocking the device and at the same time pull the device upwards out of the
bracket.
assembly
→
Observe chapter “Connecting the functional earth for assembly on wall” on page 22.
→
Securely attach the bracket using 4 suitable screws (e. g. M5 screws) to a suitable substrate
(max. tightening torque 1.5 Nm for M5 screws).
→
Slide the guide bars on the field module (see “Fig. 3”) from the top to the bottom into the guide slot of
the bracket (see “Fig. 4”) until the locking mechanism engages audibly.
7.2.2 Assembly on wall using the lateral fastening holes
→
Observe chapter “Connecting the functional earth for assembly on wall” on page 22.
→
Securely attach the field module using 2 suitable screws (e. g. M5 screws) to a suitable substrate
(max. tightening torque 1.5 Nm for M5 screws).
english