14
Installation
Type 2080
7.1.3
Installation
Warning!
Danger due to medium leakage.
Leaky connections with incorrect seating of the seals.
▶
Install all connections carefully and make sure the seals are seated properly.
Use suitable sealing material to seal the threaded connections (PTFE tape is recommended).
For threaded connections: Use open-end wrenches of the appropriate size to screw in the pipelines
and do not use the valve actuator as a screw-in lever.
No lateral bracing forces may act on the connections of the device. The device connections and
cables must be tidy.
→
Fasten the valve according to the selected connection type:
Threaded connection by screwing in the pipes, welded connection by welding, flange connection by
screwing in.
16
16
16
16 13
Ø 4.5
Ø 3.1; 6 deep; option for positioning pin Ø 3
(ensuring correct position during installation)
English
