Burkert 2000 INOX, Быстрый старт, Страница: 3 / 9

3
Quickstart
Type 2000 INOX
2.1 Symbols
Warning to prevent death or serious injuries:
DANGER!
Warns of an immediate danger!
WARNING!
Warns of a potentially dangerous situation!
Warning to prevent moderate or minor injuries:
CAUTION!
Warns of a possible danger!
NOTE!
Warns of damage to property!
Important tips and recommendations.
→
designates a procedure which you must carry out.
3 INTENDED USE
Angle seat valve Type 2000 INOX is designed to control the flow-
rate of liquid and gaseous media.
•
Observe the permitted application conditions for using the
equipment.
•
Operate only when in perfect condition and pay attention to
correct storage, transportation, installation and operation.
•
In the potentially explosion-risk area the device may be used only
according to the specification on the separate Ex type label. For
use observe the additional information enclosed with the device
together with safety instructions for the explosion-risk area.
•
Devices without a separate Ex type label may not be used in a
potentially explosive area.
•
The device may be used only in conjunction with third-party devices
and components recommended and authorized by Bürkert.
•
Use the device only as intended.
4 BASIC SAFETY INSTRUCTIONS
Danger – high pressure!
▶
Turn off the pressure and vent the lines before loosening
lines or valves.
Risk of electric shock!
▶
Before reaching into the device or the equipment, switch off
the power supply and secure to prevent reactivation!
▶
Observe applicable accident prevention and safety regula -
tions for electrical equipment!
Risk of crushing from moving pneumatic connection!
▶
When opening and closing the device, do not touch the
moving pneumatic connection.
▶
Do not reach into the area immediately above and below the
control air connection.
english