manualshive.com logo in svg

Burk 8681, Дополнительные инструкции

Поделиться
Скачать
Burk 8681 Скачать руководство пользователя страница 24

24

ChangesconcerningbüS/CANopendesign

LED

Device status

possible errors

Remedy

Red 

Error 

- it is critical if 
the LED 
is still lit 2 
minutes after 
the last device 
restart

•  Another device with the same 

Node ID is in the same network 

•  No bus connection (Gateway 

/ PLC)

 due to communication 

problems or gateway restart

 

•  Check baud rate

•  Check the Node ID address (if 

required, correct it so that each 
address is only available once)

•  Check the status of the gateway 

connected to the system

•  If required, replace the device

*)   

Display/visualization only from firmware version B.02 

5.6 

Further help 

5.6.1 

Links to different operating instructions

If you need further help for the configuration of Type 8681 (büS) you can also use further documents.

On the Bürkert website    

www.burkert.com 

  search for the type number or the device identification number and 

find the corresponding documents under “Downloads” / “User manuals” (use language filters if necessary): 

     

   

Operating Instructions Type 8681 | Control Head

 

 

Operating Instructions Type ME43

 

| Fieldbus gateway büS to Industrial Ethernet

  

For configuration and parameterisation using the Bürkert Communicator, see also: 

     

   

Software manual Type 8920

 

|

 

Bürkert Communicator

  

 

Software manual | Central configuration management  

(Search for type: ME43 / Downloads / User manual)

On the Bürkert website under “Downloads” / “Software” also can be found: 

     

  for 

Type 8681

 büS/CANopen, the 

Object List for CANopen

 and the corresponding 

EDS file 

and  

     

  for the 

gateway, the Parameter List 

for the respective specific configuration. 

To do this, enter the identification or article number of the respective device into the search field, search under 
“Downloads” / “Software” the ZIP container with the “Initiation Files”, open it and download the corresponding 
files.

5.6.2 

Firmware updates

Firmware updates of the control heads, gateways (and possibly other devices) can only be carried out using the 
Bürkert Communicator with the aid of a büS stick. This requires the “installer level”. 

The integration of the Bürkert Communicator into the network can be seen, for example, in “Fig. 2”.

The firmware is stored in the Bürkert Communicator and is kept up to date via updates.

english

Type 8681 büS/CANopen

Содержание 8681





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды