Plus-X ICRU Installation and Operation Manual Rev B
3
Use the credentials confirmed above to log in when the following screen is displayed.
Initial Connection Without DHCP
If your network does not support the DHCP protocol, the Plus-X ICRU
’s request for a dynamic
IP address will fail. If this happens, the Plus-X ICRU will assign itself the default static IP
address of 192.168.0.100. To access the unit, it will be necessary to connect your PC directly to
the Plus-X device using a crossover LAN cable or using a simple Ethernet switch.
In addition, your PC’s internal network interface must be set to a static IP address of the form
192.168.0.x. In the Windows Control Panel, search for
Change Ethernet Settings
, then select
Change adapter options
then
Local Area Connection.
Navigate to the Internet Protocol Version
4 (TCP/IPv4) Properties dialog box as displayed below.
