eBoxx EASY+
| English
BA eBoxx EASY+ dco/sgu/hbg 081221
BURG-WÄCHTER KG
•
Altenhofer Weg 15
•
58300 Wetter
•
Germany
•
www.burg.biz
BURG-WÄCHTER UK LTD
•
Eurocam Technology Park
•
Chase Way
•
Bradford
•
West Yorkshire
•
England BD5 8 HW
Control panel
"Start" button
Initiates the opening process or
opens the parcel box immediately
if the box does not contain any
parcels (Empty"status).
Numeric buttons
The digits "1" – "0" are used for
inputting the code
"End button"
-
Ends the opening process and
closes the parcel box.
- Status query (occupied/empty)
Emergency lock
*
Used for opening in an emergency
Signal LEDs
Delete button
Deletes entered digits
Note message, general error
Design
Thank you for choosing a parcel box with the
BURG-WÄCHTER eBoxx EASY+ electronics.
eBoxx status
eBoxx instructions
Status
Meaning
Empty
parcel box is empty and can also be opened without requiring
a code.
Full
Parcel box is occupied with at least one parcel and can be opened
using a user or delivery provider code.
Open
eBoxx could not be locked automatically due to the child safety
lock and remains unlocked until it is locked manually.
Activation
Open the eBoxx by pulling the door
using the recessed grip above the
keypad. Please remove and retain
all of the documents supplied with
the parcel box, store in a safe and
secure place.
Pull out the battery compartment
which is located on the inside of
the door to the bottom left of the
electronics, remove the contact
strip and reinsert the battery
compartment with the required
batteries.
An automatic calibration process
starts when the batteries are
deposited. All of the LEDs on the
eBoxx illuminate for one second and
the eBoxx EASY+ lock is opened and
closed several times. After calibration
the lock is in the "Open" status.
Please do not close the door. Perform
the following steps immediately and
with the door open.
Attention:
If the door is locked at
this point, it can only be opened
using the emergency lock.
The electronics adopt different status properties depending on the interaction
with the eBoxx, and these properties have an influence on further operability.
Below is a list of the status options and what they mean.
Note:
A status query is performed when the "End" button is pressed.
Details can be found in the chapter "Operation by user" on page 2.
Detailed instructions for using the eBoxx, its configuration, the
associated app and notes on setting up the storage location
can be found using the following link:
https://www.burg.biz/bedienungsanleitung-
paketkasten-eboxx-easy-plus/
or directly via the QR code displayed.
Note:
Please ensure that you are within the Bluetooth range of the eBoxx.
The BURG-WÄCHTER KeyApp is required for commissioning the eBoxx EASY+.
The following steps are necessary to connect the eBoxx with the app:
• The BURG-WÄCHTER KeyApp is available for download free of charge
from the App Store appropriate for your smartphone. Download and
install the app.
• Open the app, read through the licence conditions and confirm with "OK".
• You will now be asked to register; please enter the applicable data.
Read and confirm the data protection guidelines and the terms of use
and select "Register".
Note:
The BURG-WÄCHTER KeyApp is GDPR compliant. No personal data
is forwarded to BURG-WÄCHTER.
• The KeyApp requires access to the camera and Bluetooth functionality
to scan the QR code and connect the eBoxx. Please grant access when
prompted.
• Add your eBoxx in the KeyApp by clicking on the "Menu Button" (top left)
and navigating to "eBoxx / eBoxx Setting / eBoxx Units". Press the icon
(bottom right) and scan the QR code supplied with your eBoxx.
• Confirm with "Continue".
• Enter any desired name as the name of the box and the administrator
code. The factory set default administrator code is "1-2-3-4-5-6".
• Confirm your selection in the KeyApp with the start button
Change administrator code
Note:
Please carry out the following settings in the BURG-WÄCHTER KeyApp.
Please ensure that you are within the Bluetooth range of the eBoxx.
The first step during commissioning is to change the factory set administrator
code to a personal code. Any changes to the administrator code and the
user code must be made with the door open. Once the locking system has
been updated to a new code it must be checked several times keeping the
door open.
An administrator code is required for the administration of the eBoxx. The
administrator code is used, for example, to carry out firmware updates and to
add or delete users.
However, the administrator code cannot be used to open
an eBoxx.
• Navigate to "eBoxx / eBoxx settings / Change administrator code" in the
smartphone app, and select the eBoxx.
• Enter the previously valid administrator code (default factory set code
"1-2-3-4-5-6") and the new administrator code.
• Confirm the new administrator code by repeating the entry and confirm in
the KeyApp with the "Start" button.
Quick start guide
*
Note:
Please only remove the
cover over the emergency lock if
you need to open the eBoxx in an
emergency. Opening the parcel
box using the enclosed key is only
intended for emergencies. This
procedure does not change the
status of the eBoxx and will cause
the unit to malfunction.
