Operating Instructions
BWNVR-2411P, SNVR-3842e, SNVR-31642e, BWNVR-31632Pi, SNVR-36444e
_________________________________________________________________________________
- 69 -
6.4.5 Main menu
Alarm(s)
Motion detection
The motion detection setting is channel-dependent and device-dependent. BURG-GUARD and
BURG-WÄCHTER devices or ONVIF compatible devices with motion detection are supported. The
setup takes place remotely on the camera system.
6.4.5.1
Main menu
Alarm(s)
Motion detection Motion
Set up motion detection
I)
First select the camera alarm channel for which you want to set up motion detection.
II)
Then click on Set Area
a. Select one of the four coloured motion detection frames
b. Highlight the desired area
c. Set the sensitivity and threshold for the selected coloured motion detection zone.
d. Click Save
e. Repeat this process for more zones if needed.
III)
Activate the function with the switch button "Bew. aktivieren".
IV)
Set the time period, dwell time before alarm triggering, post-recording (delay time).
V)
Click on Save to apply the settings.