Instructions for Assembly and Use
R999 8-ROLL & R998 4-ROLL Vertical Dispenser / Cutter
***PLEASE EMPLOY CAUTION WHEN USING THESE UNITS. ALTHOUGH BLADES
ARE DULL THEY ARE UNDER TENSION AND CAN STILL CAUSE HAND AND
FINGER INJURIES. ALSO, BE AWARE WHEN FULLY LOADED WITH PAPER, THESE
UNITS CAN WEIGH UPWARDS OF 450 LBS. NEVER ALLOW CLIMBING OR RIDING.
1.
ONCE REMOVED FROM CARTON, INSTALL CASTERS AS SHOWN IN
DIAGRAM USING 1/2" HEX NUTS AS SHOWN IN DIAGRAM. (ONLY THE 8-
ROLL VERTICAL IS PICTURED.) TIGHTEN SECURELY.
2.
PULL BLADES OPEN UNTIL THEY LOCK.
3.
IT IS ADVISED THAT TWO PEOPLE SHOULD WORK IN TANDEM TO
INSTALL INDIVIDUAL ROLLS. WHEN LOADING UNIT, BE SURE PAPER
FEEDS LEFT TO RIGHT. ALSO IT IS IMPORTANT THAT THE ROLLS ARE
CENTERED UPON THE LOWER PAPER HOLDER ASSEMBLY IN ORDER
FOR MATERIAL TO SPIN FREELY. ONCE THE BOTTOM IS SECURELY
RESTING ON THE LOWER PAPER HOLDER ASSEMBLY, SLIDE THE TOP
DOWEL THROUGH THE ROLL. CLOSE BLADE. THE BLADE SHOULD NOW
BE RESTING FIRMLY AND EVENLY AGAINST PAPER ROLL.
4.
REPEAT STEP 3. FOR THE REMAINING CUTTING STATIONS.
MANUFACTURER PART NUMBERS:
#1019RG -
TOP HOUSING/ARM ASSEMBLY
#1019LG
-
BOTTOM HOUSING/ARM ASSEMBLY
#26138P - REGULAR VERTICAL BLADE (39-1/2")
#101
1
0 -
FORMED
DOWEL ASSEMBLIES (
7-11/16
")
#376 - NON-LOCKING CASTER
#377 - LOCKING CASTER
#378 - 1/2" HEX NUT FOR SECURING CASTER
#1000 -
LOWER PAPER HOLDER ASSEMBLIES
CONSISTS OF:
#1006 - 5/16" x 4" BOLT
#1009 - 5/16" LOCK WASHER
#1025 - SMALL SPACER
#1033 - LARGE WASHER
#1040 - 5/16" SAE FLAT WASHER (2)
#11390 - LARGE PLASTIC SPACER (2)
#1007 - 5/16" HEX NUT
Page 1 of 2
1650 McReynolds Avenue, N.W.
Grand Rapids, Michigan 49504-2043
Phone: 616-363-4416 Fax: 616-363-0380
www.bulmanproducts.com
