WORK TABLES WITHOUT SHELVING
(A80-36/A80-06)
1. Table unit is shipped complete in one carton containing legs, braces, and
all hardware for assembly.
2. To begin assembly, place table top upside down on flat surface. Attach
right and left leg assemblies to the pre-attached channels as shown in
Figure 1. (View A) (Do not fully tighten ¼” hex bolt and nut.)
3. Attach rear brace as shown in Figure 1. All leg and brace connections
may now be securely tightened.
4. Table may now be turned over into upright position. Adjust leveling screw
on bottom of each leg to secure unit in place.
5. If unit is provided with accessories drawer, simply slide into pre-attached
drawer channels as shown in Figure 1.
Hardware
Quantity
Description
Part No.
12
1/4 -20 x 2” Hex Head Grade 5 Bolts
67070
4
3/4” – 10 x 3” Carriage Bolts
67015
4
3/4” – 20 Jam Nuts
67016
12
1/4” Flat Washers
1040
12
1/4” – 20 Keps Hex Nuts*
11860
*The Keps nuts are hex nuts with a free spinning lock washer attached.
A80-36 Table shown above.
A80-
0
6 Table shown above.
Rev: 3-12-2013
