manualshive.com logo in svg

Bulls Lacuba EVO 45 Sport, Оригинальная инструкция по эксплуатации, Страница: 99 / 133

Поделиться
Скачать
Bulls Lacuba EVO 45 Sport Скачать руководство пользователя страница 99

MY19B103_1.0_04.01.2019

99

Maintenance

8.2

Maintenance

The following maintenance measures must be carried 
out regularly [

 Check list, page 91

]. They can be 

carried out by the operator and rider. In case of any 
doubt, consult the specialist dealer.

8.2.1

Wheel

Check the 

tyre

 wear.

Check the 

tyre pressure

.

Check the 

rims

 for wear.

• The rims of a rim brake with invisible wear indicator 

are worn as soon as the wear indicator becomes 
visible in the area of the rim joint. 

• The rims with visible wear indicator are worn as soon 

as the black, all-round groove on the pad friction 
surface is no longer visible. We recommend that you 
also replace the 

rims

 with every second brake lining 

replacement.

Check the tension of the spokes.

Crash and falling caused by unintentional activation

There is a risk of injury if the drive system is activated 
unintentionally.

 Remove the battery before maintenance. 

CAUTION

!

Crash caused by braking hard on rims

A rim can break and block the wheel if you brake hard. 
This may cause a crash with serious injuries.

Check rim wear on a regular basis. 

If the pressure is too low in the tyre, the tyre does not 
achieve its load bearing capacity. The tyre is not stable 
and may come off the rim.

If the pressure in the tyre is too high, the tyre may burst.

Check the tyre pressure against the specifications

Adjust the tyre pressure

 as necessary.

WARNING

!

NOTICE

EN_MY19B103_1.0_BULLS Brose Lacuba Evo 45 Sport MY19_Inhalt.book  Page 99  Tuesday, January 8, 2019  4:38 PM

Содержание Lacuba EVO 45 Sport






































































































































Отзывы:

Нет отзывов