manualshive.com logo in svg

Bulls Lacuba EVO 45 Sport, Оригинальная инструкция по эксплуатации, Страница: 97 / 133

Поделиться
Скачать
Bulls Lacuba EVO 45 Sport Скачать руководство пользователя страница 97

MY19B103_1.0_04.01.2019

97

Maintenance

8.1.3

Servicing

8.1.3.1

Servicing the frame

Dry frame after cleaning

Spray with care oil Clean off the care oil again after 
a short time.

8.1.3.2

Servicing the stem

Apply silicone or Teflon oil to the stem shaft tube 
and the quick release lever pivot point.

If you have speedlifter Twist, also apply oil to the 
unlocking bolt using the groove in the speedlifter 
body.

Apply a little acid-free lubricant grease between the 
stem quick release lever and the sliding piece to 
reduce the quick release lever operating force.

8.1.3.3

Servicing the fork

Treat the dust seals with fork oil

8.1.3.4

Servicing the drive elements

Spray the cassette, the chain wheels and the front 
derailleur with a degreasing agent.

Clean coarse dirt with a brush after soaking for a 
short time.

Wash down all parts with dish-washing detergent 
and a toothbrush.

8.1.3.5

Servicing the pedals

Treat with spray oil after cleaning.

8.1.3.6

Servicing the chain

Grease the chain thoroughly with chain oil after 
cleaning.

EN_MY19B103_1.0_BULLS Brose Lacuba Evo 45 Sport MY19_Inhalt.book  Page 97  Tuesday, January 8, 2019  4:38 PM

Содержание Lacuba EVO 45 Sport






































































































































Отзывы:

Нет отзывов