manualshive.com logo in svg

Bulls Lacuba EVO 45 Sport, Оригинальная инструкция по эксплуатации, Страница: 93 / 133

Поделиться
Скачать
Bulls Lacuba EVO 45 Sport Скачать руководство пользователя страница 93

MY19B103_1.0_04.01.2019

93

Maintenance

Remove battery and display before basic cleaning.

8.1.2.1

Cleaning the frame

Soak dirt stains on the frame with dish-washing 
detergent if the dirt is thick and ingrained. 

After leaving it to soak for a time, remove the dirt 
and mud with a sponge, brush and toothbrush. 

Use a watering can or your hand to rinse the frame 
to finish off.

Service the frame after cleaning.

8.1.2.2

Cleaning the stem

Clean stem with a cloth and washing water.

Service the stem after cleaning.

8.1.2.3

Cleaning the wheel

Check the tyres, rims, spokes and spoke nipples for 
any damage when cleaning the wheel.

Use a sponge and a brush to clean the hub and 
spokes from the inside to the outside. 

Clean the rim with a sponge.

Greased parts, such as the seat post, the handlebars 
or the stem, may no longer be safely and reliably 
clamped.

Never apply grease or oil to clamping sections.

NOTICE

Crash caused by braking hard on rims

A rim can break and block the wheel if you brake hard. 
This may cause a crash with serious injuries.

Check rim wear on a regular basis. 

WARNING

!

EN_MY19B103_1.0_BULLS Brose Lacuba Evo 45 Sport MY19_Inhalt.book  Page 93  Tuesday, January 8, 2019  4:38 PM

Содержание Lacuba EVO 45 Sport






































































































































Отзывы:

Нет отзывов