Bulls 22-15-1078, Перевод оригинальной инструкции по эксплуатации

Страница: 120 / 234

MY22B01 - 12_1.0_26.08.2021
119
Operation
6.16.3 Integrated battery
Only applies to pedelecs with this equipment
6.16.3.1 Removing the integrated battery
Figure 129: Removing the integrated battery
1 Open battery lock with battery key (1).
 The battery is released and falls into the
retainer guard (2).
2 Hold the battery in your hand from below. Use
the other hand to push on the retainer guard
from above (3).

The battery is released and falls into the hand
(4).
3 Remove the battery from the frame.
4 Remove the battery key from the battery lock.
6.16.3.2 Inserting the integrated battery
Figure 130: Inserting the integrated battery
1 Place the battery into the integrated battery
lower mount with the contacts facing the
front (1).
2 Flip the battery upwards so that the battery is
held by the retainer guard (2).
3 Push the battery upwards (3).
 There is an audible clicking noise.
4 Check battery to ensure it is firmly in place.
5 Lock the battery with the battery key;
otherwise, the battery may fall out of the mount
when you open the see (4).
6 Remove the battery key from the battery lock.
7 Check the battery to ensure it is firmly in place
before each ride.
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)