Bullhorn RM2000 Series, Руководство по установке и настройке

Страница: 73 / 82

RM2000 Series Installation and Configuration Guide
Glossary 65
Scaling Based on configuration settings for each
channel, a positive or negative scale value
displays in the Scaling field. The UCT software
scales a raw register reading using the scale
value configured for each channel.
The method used by the UCT software to scale a
raw register reading is as follows:

Divide the raw reading by the scale
value.

Select the first 6 digits to the left of the
decimal point for a 6-digit register or the
first 12 digits to the left of the decimal
point if working with a double register
(12-digit register).

If required, add leading zeroes to the left
of the number to produce either a 6-digit
scaled reading or, a 12-digit scaled
reading when working with a double
register.

If you are working with a 6 or 12-digit
register and the scaled reading is larger
than 6 or 12 digits respectively, the unit
reports a register reading of “999999”.
The Bullhorn Asset Tracker website
displays scaled readings according to the
“multiplier” value you select on the
website.
Serial No. Unique serial number assigned to the unit at the
factory for identification purposes.
SIM Subscriber Identity Module. Unique
identification number assigned to the digital
cellular radio by the service provider.
Table D-1. Glossary of Technical Terms (continued)
Term Definition