Bullhorn RM2000 Series, Руководство по установке и настройке

Страница: 70 / 82

RM2000 Series Installation and Configuration Guide
62 Glossary
Radio ISN Radio Identification Serial Number. The
SkyWave satellite terminal and Bullhorn unit
ship from the factory as a matching pair. Both
are assigned the same ISN by AI for
identification purposes. Also see Unit ISN.
Radio Version Version number assigned to an analog cellular
radio by the manufacturer. The UCT software
displays “n/a” (not applicable, not available) for
digital cellular and satellite unit types such as
RM2020.
Raw Read/Scaled Read Both of these columns show the last reading
received from the input device for each channel
that is mapped to a register address or item
number. The Raw Read field shows the last
received reading without scaling applied to the
reading. The Scaled Read field shows the last
received reading with scaling applied to the
reading. The UCT software scales the raw
reading using the scale value you specify for
each channel on the channel configuration
window.
Read Now/Auto Update Click the Read Now button to force the unit to
read all registers. The UCT software displays
updated register readings in the Raw Read and
Scaled Read fields. When Auto Update is
enabled, the UCT software displays current
register readings every 5 minutes until Auto
Update is disabled.
Register/Item No. The UCT software displays either the Register
or Item No column depending on which
communication protocol you select on the
Modbus Communications Settings window.
Register displays for all communication
protocols other than Mercury. Item No displays
only for the Mercury protocol. The register
address currently mapped to a channel displays
in the Register field. The Mercury item number
currently mapped to a channel displays in the
Item No field.
Table D-1. Glossary of Technical Terms (continued)
Term Definition