STEP 1
: With Deck upside down, insert four Item A
screws through the four holes in the Deck. Turn Deck
back over and set on a level surface.
STEP 2
: Align the Clamp Assembly
and secure to Deck using the four
screws and four Item B nuts. Do
not over tighten. Cut zip tie after
mounting.
Screws
Deck
Turn Over
ASSEMBLY
*You will need a #3 Phillips head screwdriver
and a 7/16” (11mm) socket or wrench.
Please Review and Verify Parts Included in Box:
HARDWARE KIT:
1. Clamp Assembly
2. Base
3. Knife Kit
4.
Hardware Kit
Item A.
(4) 1/4”-20 x 1-1/2” PH Phillips Screws
Item B.
(4) 1/4”-20 Nuts
A.
B.
Item B
Item A
1
3
4
2
Quick Start Guide
for Magnum Shut-N-Cut #1901-26-01
