background image

SYSTEM COMPONENTS

TECHNICAL ASSISTANCE

Should you need help. First check our website at www.bulldogsecurity.com/wires.htm or call our toll-free

Tech Support Hotline Monday through Friday 9AM-8PM and Saturday 10AM-4PM EST at 800-878-8007.

You must give the following information:

Name

•Telephone Number with Area Code (Fax number if applicable)

•Year, Make, and Model of the vehicle

•The model number of the system you are installing

•The type of assistance you are requesting

If you give the above information you will be called back as soon as possible, usually within 10 minutes.

BEFORE YOU BEGIN

2

Your system includes:

1-Installation & Operation Guide

1-Main Control Module

2-Four Button Remote Transmitter with Slide Protector

1-126db Six Tone Siren

1-Wireless Harness

1-Momentary Switch

REQUIRED TOOLS

1-Extended Range Antenna

1-Anti-carjacking Switch

1-LED Status Indicator with Bracket

1-Warranty

1-Warning Sticker for Under the Hood

2-Bulldog Window Decals

Congratulations, you have purchased one of the most advanced alarm systems ever made. Your new remote

starter is a technological breakthrough utilizing the most advanced, state of the art technology and

components. It is computer controlled and manufactured in the U.S.A. The dependability and variety of

features make Bulldog Security the leader in the industry. Enjoy your new remote starter for years to

come!

This remote system is designed to start your vehicle by sending a command signal from the remote transmitter

You will need a computer-friendly test light, electrical tape, extra 16 awg wire and wire strippers or

cutters.

Special Situations

Allow you to remotely lower the sensitivity of your shock sensor for special situations

(i.e. when parking in or near construction zones, heavy rain, trucks, etc.) (remotely

programmable)

Computer Controlled Fan

No additional wiring needed. This model distinguishes between an electric fan turning on

Sensor Override

and a light bulb.

E Squares Memory Back Up

The system memorizes its programmed features if power is lost.

Limited Lifetime Warranty

Guarantees Lifelong protection.

Содержание 5002PRO















Отзывы: