manualshive.com logo in svg

Bull Escala PL 1650R-L+, Информация о оборудовании

Поделиться
Скачать
Bull Escala PL 1650R-L+ Скачать руководство пользователя страница 70

Pull the control panel out, toward the front of the system, until it can be pivoted downward on its
hinge.

2. 

To move the control panel back into the device enclosure, lift the control panel up to align it with the
opening and push it into place until you feel the tab lock, as shown in the following figure.

Figure 2. Close the model ESCALA PL 250R-L, PL 250R-L+ or PL 450R-VL+

 control panels

3. 

Parent topic:

Remove the front cover from the model ESCALA PL 250R-L, PL 250R-L+ or PL 450R-VL+

Remove the front cover from the rack-mounted model 112/85, ESCALA
PL 250T/R, PL 250T/R+ or PL 450T/R-L+, ESCALA PL 450T/R, PL
450T/R+ or PL 850T/R-L+, and the 05/95 expansion unit

To remove the rack-mounted system or expansion unit front cover, follow these steps:

Open the front rack door.

1. 

Remove the two thumbscrews A that secure the system or expansion unit B to the rack as shown in
the following figure.

2. 

Push both cover-release latches C in the direction of the arrows to release the cover from the system
or expansion unit.

3. 

Pull the cover out and away from the system or expansion unit.

4. 

Parent topic:

Related procedures

Place the rack-mounted system or expansion unit in the service
position

By placing the rack-mounted system or expansion unit in the service position, you can access the inside of the
unit.

Control panel

64

Remove the front cover from the rack-mounted model 112/85, ESCALA PL 250T/R, PL 250T/R+ or PL 450T/R-L+, ESCALA PL 450T/R, PL 450T/R+ or PL 850T/R-L+, and the 05/95 expansion unit

Содержание Escala PL 1650R-L+



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды