Bull Escala EL260B, Инструкция по установке и эксплуатации

Страница: 48 / 78

32
Escala Blade EL260B - Installation and User's Guide
5. Remove the hard disk drive if one is installed. See Removing a SAS hard disk drive on
page 25.
6. Remove the four screws that secure the drive tray to the system board and remove the
drive tray.
Save the screws that secure the tray to the system board. Store the screws in a safe
place.
3.8.4 Installing the expansion bracket
You can install the expansion bracket.
Figure 3-9. Installing the expansion bracket
To install the expansion bracket, complete the following steps:
1. Place the expansion bracket in position on the system board.
2. Secure the bracket to the system board with two screws from the option kit or from the
removed drive tray.
If you have other options to install or remove, do so now. Otherwise, go to Completing the
installation on page 34.