Bull 296/C3, Руководство пользователя, Страница: 32 / 123

Removing the 296/E3 Front Bezel
To remove the front bezel, do the following:
1. Remove the bezel door as described in “Bezel Door (296/E3)” on page 14.
2. Press down on the two bezel-release levers.
3. Pull the top of the bezel out and away from the system.
4. Gently pull the bezel up and off the base, releasing the lower bezel locking tabs.
1
3
2
5
6
7
4
1 296/E3 5 Bezel Door Handle
2 Bezel-Release Levers 6 Lower Bezel Locking Tab (Quantity 2)
3 Front Bezel 7 Lower Bezel Retaining Slots (Quantity 2)
4 Front Door
Replacing the 296/E3 Front Bezel
To replace the front bezel, do the following:
1. Place the two lower bezel locking tabs into the retaining slots located on the system base.
2. Rotate the bezel up toward the top of the system, ensuring that the aligning pins are aligned with their
mating holes located on the system.
3. Gently push the bezel in until the two bezel release levers are seated in their respective slots.
4. Replace the bezel door as described in “Bezel Door (296/E3)” on page 14.
16
296/C3 and 296/E3 Parts Guide