Buhnen HB 5010, Перевод оригинального руководства по эксплуатации, Страница: 33 / 142

Programming
25
6.3.2.2 Time operation
Mo ON
ON: 11:15 OFF: 17:30
StandbyON: 00:00
StandbyOFF: 00:00 Di ON
AN: 06:15 OFF: 17:30
StandbyON: 12:00
StandbyOFF: 12:30 So ON
ON: 00:00 OFF: 00:00
StandbyON: 00:00
StandbyOFF: 00:00
Figure 6.3.2.2/1: “Time operation“
The switching times for the time-controlled operation are specified here for every day of
the week:
• Day (ON/OFF)
• Turn on time (ON)
• Turn off time (OFF)
• Begin standby time (Standby ON)
• End standby time (Standby OFF)
A submenu is available for every day of the week (see Figure 6.3.2.2/1). Navigate be-
tween the individual submenus with “Up/Down Arrow.”
6.3.2.3 Date/Time
Date : Tu 11:07:05
Time: 13:38
Format: TT-MM-JJ
Figure 6.3.2.3/1: “Date/Time“
The tank system has a battery-supported realtime clock. The date, time, and display for-
mat of the date is entered in this menu item.
Three different date formats can be selected (example: July 14, 2005)
• DD-MM-YY (display: 14-07-05)
• YY-MM-DD (display: 05-07-14)
• MM-DD-YY (display: 07-14-05)
Info!
Self-acting resetting of system time/date or the error message depicted below indicate a
drained battery. In this case, replace the battery immediately (see Chap. 8.3) to ensure
the faultless function of the time control.
Display
Error Time/Date
Confirm with Enter
Figure 6.3.2.3/2: “Error message Date/Time““
This error message will also be displayed directly after the battery has been replaced.
Confirm with “Enter” and reset the date and time.