Buhnen HB 5010, Перевод оригинального руководства по эксплуатации, Страница: 15 / 142

Technical data
7
2 Technical data
Designation HB 5010
Dimensions (W x D x H) 720 mm x 360 mm x 360 mm
Weight 35 kg
Power supply 230 VAC/50 Hz
Max. power consumption 3,400 W
Max. current consumption 15 A at 230 V
Type of protection IP32
Class of protection 1
Temperature control Electronic 6-channel temperature controller
Heating capacity of tank and connection block 1,460 W
Permitted connected load per hose 1,440 W (The sum of output of hoses and guns may
not exceed 1710W.)
Permitted connected load for manual application unit 400 W (The sum of output of hoses and guns may
not exceed 1710W.)
Working temperature 40...210 °C
Temperature sensor Pt 100, alternatively Ni 120 for hose and
manual application unit
Hose connections 2
Overtemperature protection Yes, limited to 260 °C
Permitted ambient temperature 0…40 °C
Melting capacity 4.5 kg/h
Warming-up period approx. 30 minutes
Pump system Gear wheel pump
Pump capacity 26 kg/h
Drive Geared motor
Rotational speed of pump 65 r.p.m.
Bypass valve setting 35 bar; max. 55 bar
Usable tank volume 4.5 liters
Noise emission 72 dbA
2.1 Product identification
These operating instructions apply to all HB 5010 basic units with the following illustrated
type plate.
HB 5010
Teile-Nr.: H530700
el. Anschluß:
220-240V AC / 3400W
Ser.-Nr.: 00xxx
Baujahr: 2016
Bremen - Germany / www.buehnen.de
Figure 2.1/1: Type plate on unit (example)
Two type plates are attached to the HB 5010 basic unit:
• on the left narrow side of the housing
• on the inside of the unit on the left side of the housing of the control electronics
(see following figure)